Table of Contents: Preface
Hydrodynamic Lubrication of Roughened Surfaces with Different Asperity Heights and Wave Numbers, pp.1-20
(Leonid Burstein)
Predictions of Performance Characteristics in a Large Tilting
Pad Thrust Bearing, pp.21-38
(D.V. Srikanth, K.K. Chaturvedi and A. Chennakesava Reddy)
Finite Element Based Elastic-Plastic Contact of Fractal Surfaces Considering Strain Hardening, pp.39-58
(Prasanta Sahoo, Dipankar Adhikary and Kashinath Saha)
Scale Effects in Elastic-Plastic Adhesive Contact of Rough Surfaces, pp. 59-74 (Prasanta Sahoo and S. Mohamed Ali)
Adhesive Friction for Elastic-Plastic Contacting Rough Surfaces Based on Plastic Asperity Concept, pp.75-98
(Prasanta Sahoo and S. Mohamed Ali)
Corrosion Behaviour of Nitrided Austenitic Stainless Steels in a Corrosive Aqueous Environment, pp.99-112
(T. Kumar, K. Palanikumar, S. Venugopal and A. Rajadurai)
On the Deformation of a Hard Coating/Soft Substrate Systems Under Spherical Nanoindentation: A Boundary Element Numerical Analysis, pp.113-130
Kinetic Monte Carlo Simulation for the Growth of Cu Films on Different Initial Active Substractes, pp.131-146
(Qingcheng Li, Xianguo Hu and Changqi Chen)
Electrochemical Corrosion Evaluation Against Surface Roughness Parameter Ra of 25Cr Super Duplex Stainless Steel Surfaces, pp.147-158
(A.M. Elhoud, N.C. Renton, and W.F. Deans)
Effect of Surface Roughness on Corrosion of Mild Steel and 316L Austenitic Stainless Steel in Sodium Chloride Saline Solutions, pp.159-170
(L. Abosrra, A.F. Ashour, S.C. Mitchell and M. Youseffi)
Application of Some Basic Corrosion Equations for Copper-Nickel Alloy in Inhibited Acid Media, pp.171-186
(Anees A. Khadom, Aprael S. Yaro and Abdul Amir H. Kadhum)
Effect of morphology of Diamond Films on Friction Response in Reciprocating Sliding at Milli-Newton Loads, pp.187-204
(Manish Roy, G. Vorlaufer, A. Pauschitz and R. Haubner)
Wear Performance of Cold Spayed Ni-20Cr Coatings on T-22 and SA-516 Boiler Steels, pp.205-220
(H.S. Arora, N. Bala and H. Singh)
Prediction of Erosion Wear Rate of Cemented By-Pass Dust Filled Hybrid Composites Using Neural Network and Fuzzy Logic, pp.221-246
(S.S. Mahapatra, Santosh Kumar Nanda, K. Prasanna and Suhil Garg)
Studies on the Influence of Positive Roughness on the Performance of Journal Bearing, pp.247-268
(Saurabh Kango and R.K. Sharma)
Attribute Based Design Specification, Comparison and Selection of Electroplating Waste Treatment System Using MADM Approach, pp.269-292
(Abhishek Kumar, Shibu Clement and V.P. Agrawal)
CAD/CAM- Based Stick-Slip Motion Control and its Application to an Orthogonal-Type Robot, pp.293-310
(Fusaomi Nagata, Takanori Mizobuchi, Keigo Watanable, Tetsuo hase, Zenku Haga and Masaaki Omoto)
Catalyst Systems for Exhausted Gases Neutralization of Internal-Combustion Engines, pp.311-326
(A.G. Mamalis, A.T. Pugachov, V.V. Starikov, V.E. Ved, S.N. Lavrynenko, E. Kakaras)
Index |